WELCOME TO SCRATCHMUSIC.CO.UK

A HIGHLY SPECIALISED COMPANY PROVIDING TECHNICAL ASSISTANCE TO INSTALLERS OF AUDIO, VISUAL AND LIGHTING CONTROL SYSTEMS.

SUPPLIERS TO THE TRADE

Replace your existing light switches with SceneStyle4 and experience the world of scene setting lighting controls.

SceneStyle4 is a self-contained, four circuit, dimmer switch which will fit into a double gang wallbox using the existing wiring.

Lighting scenes can be swiftly created that will transform the atmosphere in your home to suit your mood or style, all at the touch of a button.

Master and individual circuit raise and lower control with variable fade times bring your lighting to life while an infrared remote handset is supplied with each unit for the ultimate control flexibility.

A selection of front fascia finishes are available and the colour of the indicator LEDs can be simply changed to suit your personal taste and interior décor

This product provides a wired solution for routing I.R. commands from different locations within a home, back to a central point where the equipment to be controlled is located. This will then permit such equipment as a video recorder, satellite receiver and hi-fi system etc., to be controlled from various remote locations. This is achieved by firing the original equipment’s remote control handset (or pre-programmed or learning equivalent) at a suitably positioned WM22 I.R. Sensor. The command codes are routed via a wired link to the Roomlink Driver (normally located next to the source equipment) and in turn, to an I.R, Emitter which “repeats” the codes enabling the source equipment to receive and respond to those commands. We recommend that each WM22 is wired back to the Roomlink Driver using simple four core telephone wire or screened Cat-5 cable with the drain wire connected to the screen terminal. If that is inconvenient, or more than four I.R. Sensors are required, it is possible to daisy chain extra Sensors. Roomlink Starter pack 3 consists of * 1 x Roomlink Driver * 2 x SL-DE Double Emitter Packs * 2 x SL-FE Flood Emitter * 1 x 12 volt Power Supply (UK only) * 1 x WM22 Roomlink Eye

The QED Systemline Modular multi room music system.

Allows you to play any music source in up to any or all of 8 separate zones. All components are connected by CAT5 data cable. The speakers are self powered and contain an IR receiver. This allows you to change the music source and volume in each individual zone using the LRN7 learning remote control. You can also install a KPM7 wall mount keypad providing the same control functions.

ALM2/IR and ALM2 Speaker

Provides for IR control of music sources/volume in the room

All these systems can be custom designed to suit your particular application.

Inputs can be fromTV audio, CD, DVD, Satalite audio, FM or DAB radio, MP3 player.

Cabinet speakers of your choice can be added by using the ZAM40 remote amplifier. This can also be used to interface between the ALM2/IR and a powered sub bass speaker.

KPM7 Wall Control

Connects to ALM speaker via CAT5 cable

8 Zone Modular Hub

Input for all your music sources and connects to ALM speakers via Cat5 cabling.

LRN7 learning remote control

Teach it to replace all your remote controls

NEW MC-6 range 10 Watt 6" ceiling loudspeaker for PA / VA and background music applications. Up to 103 dB(A) at 10W at 1m Mild Steel Flush fitting Finish to RAL9010 Available BS 5839, Part 8 compliant 100V line transformer

MSP-20 range 20 Watt plastic projector loudspeaker for PA / VA and background music applications. Up to 108 dB(A) at 20W at 1m IP54 Plastic

MSP-30 range 30 Watt plastic projector loudspeaker for PA / VA and background music applications. Up to 112 dB(A) at 30W at 1m IP54 Plastic BS5839, part 8 compliant version available

SPH-20 & SPH-20 WMT range 20 Watt pendant or wall mounted sphere loudspeakers for PA / VA and background music applications Up to 107 dB(A) at 20W at 1m Black or White ABS plastic 100V line transformer or 8 ohm operation BS5839, part 8 compliant version available

SUB-200 20 Watt high quality moulded cabinet loudspeaker for PA / VA and background music applications. Up to 101 dB(A) at 20W at 1m IP54 version available White or black ABS plastic Available BS5839, part 8 compliant

SUB-500 50 Watt high quality moulded cabinet loudspeaker for PA / VA and background music applications. 105 dB(A) at 50W at 1m IP54 version available White or black ABS plastic Available BS5839, part 8 compliant

UNICUBE-6 & UNICUBE-10 6 & 10 Watt universal moulded cabinet loudspeakers for PA / VA and background music applications Up to 104 dB(A) at 10W at 1m White or black high impact plastic BS5839, part 8 compliant version available 100V line or 8 Ohm versions Co-axial & weatherproof versions available

CAB-6 6 Watt cabinet loudspeaker for PA / VA and background music applications 98 dB(A) at 6W at 1m Black or Teak veneered board Available with volume control, and/or relay restoration 100V line or 8 Ohm versions

WS-6 & WS-10 dual cone / coaxial cabinet loudspeakers for PA / VA and background music applications. Up to 101 dB(A) at 10W at 1m White ABS plastic BS5839, part 8 compliant as standard

Tree Stump Speaker

Lo impedance or 100 volt line

Rock Speaker

Lo Impedance or 100 volt line

The F.A. Cup!! On a visit to Doncaster Rovers

Module 12 Indoor RGB Colour Changer

Module 6 MR16 RGB

Module 3 RGB

Modulation Driver Runs up to 36 individual LED's

TRYKA LED's in action at Rudolph's

CX163 Two Zone Stereo Mixer with Mono Utility Output FEATURES 2 zone mixer with 2 stereo zones plus a mono utility output. Both stereo zones can be configured to run as mono Utility output is constant 0dBu (no music level control) Utility music source selectable via internal jumper from Line 1 Zone 1(post priority) or Zone 2 Easy to use Easy to install, and to configure Music section 6 stereo line inputs Line 6 priority over other input sources in Zone 1 only Remote music mute Microphone section 1 microphone input (can use phantom power) Microphone access contacts for paging to all 3 zones Two band microphone EQ 100Hz high pass filter on microphone input Zone Features Remote level control in each zone using the RL-1 Two-band EQ on Zones 1 & 2 Microphone over music priority Front panel controls give microphone level, music source select and volume for both the stereo zones

46/50 Four Zone Integrated Mixer Amplifier FEATURES 6 stereo line inputs 2 microphone inputs with voice operated priority over music 50 watts @ 4 Ohms output per zone Dynamic Clip Limiters on every zone Mic 1 has priority over mic 2 Direct connection of optional remote modules for music level (RL-1) and music level and source selection (RSL-6) Facility input (zone 1 only) for active modules AE-1, DM-1 & LM-1 Dedicated 4 zone paging mic with chime available (CPM 4) 100V/70V 4 zone line module available (CXL-4160 fits internally) 100V/70V single zone line module available (CXL-40, fits externally on CXL-600 mounting tray) 65 Hz high pass filters (switchable) on each zone for 100V/70V line applications Tamperproof music EQ on each zone Fire alarm music mute Full protection Force cooled by vari-speed fan

Z4II Multi Zone Venue Mixer FEATURES Z4II Four zone mono mixer with simple, clear front panel controls. Six line inputs with pre-set gain controls. Line 6 priority, can be selected on a zone by zone basis Facility input, is available on a zone by zone basis With remote active module LM-1, you can add an additional line & mic input and control the Source level and source selection With remote active module DM-1 you can add two extra mic inputs, with level and HF LF controls Two mic inputs with pre-set gain and front panel level controls. Dedicated paging mic inputs with zone routing facility and full priority. Four zone paging mic CPM-4 available with chime Separate equalisation for mic and music signals. All mics have priority over music. Bose® Equaliser Modules optional per zone

MPA-626 Commercial PA Amplifier FEATURES MPA-626 Six line inputs with pre-set gain controls Option for automatic priority for audio signals present on Line six 2 Mic inputs with equal or descending priority Independent EQ for Mic & Music signals Remote control of music level Restoration relays built in Remote Music Mute 150W at 4 ohms 120W at 2 ohms, 50, 70 & 100v line Integral Chime

CPM4/8 Paging Microphones FEATURES Up to 5 mics can be used with one mixer. First come first served priority available. Zone selection and 'call all' facility. Internal chime sounder. High quality cardiod microphone capsule.

Close Couple ceiling mount for projectors

Universal projector mount. Requires Ceiling Mount

A range of LCD and Plasma Display bracketry